Kaveri Mehendi Cone Natural Mehendi Pack of 12

The Kaveri Mehendi Cone Natural Mehendi is a ready-to-use henna paste that comes in a cone form. Here’s how you can use it to create beautiful designs:

Instructions:

1. Preparation:
   • If the cone is stored in the refrigerator, allow it to come to room temperature before use. This will make the paste easier to flow.
   • You may also shake the cone gently to ensure that the paste inside is evenly distributed.
2. Cutting the Tip:
   • Carefully cut the tip of the cone with a small scissor. The size of the hole you make will determine the thickness of the lines. For fine lines, cut a small hole, and for thicker lines, make the hole slightly larger.
3. Applying the Mehendi:
   • Start by practicing your design on a piece of paper or a small surface to get a feel for the flow of the paste.
   • Hold the cone at a 45-degree angle and apply gentle pressure while drawing your design on the skin. You can create intricate patterns or simple designs depending on your skill level.
   • Keep the skin clean and dry before applying the mehendi for better adhesion.
4. Drying:
   • Allow the mehendi to dry on the skin. It can take anywhere from 30 minutes to 2 hours, depending on the design and thickness.
   • The longer you leave the paste on, the deeper and darker the stain will be. For optimal results, try to keep the mehendi on for 1-2 hours.
5. Removing the Mehendi:
   • Once the paste is dry and begins to crack, gently scrape it off with a blunt object or use your fingers. Avoid using water to remove it.
   • For a darker stain, you can apply a mixture of sugar and lemon juice to the dried mehendi. This helps enhance the color.
6. Aftercare:
   • Avoid washing the area with water for several hours after removing the mehendi. The stain will continue to darken over the next 24 hours.
   • If needed, apply a moisturizer to keep the skin soft.

Using this cone is an easy way to apply natural henna, and with a little practice, you can create intricate and beautiful designs.